User's Manual

14 Storage Center 5.5 System Manager User Guide
Introduction
Selecting Multiple Components
To perform one command on multiple similar components:
1 In the system tree, select a component folder, such as Volumes or Assigned Disks.
2 In the main window, using the Shift or Ctrl key, select multiple objects. The shortcut
menu above the main window displays commands available to multiple objects. For
example, clicking on the Volumes folder icon and selecting volumes in the main window
allows you to delete multiple volumes at once or move multiple volumes to a new folder.
View Menu
Click View to open the View menu.
Figure 6. View Menu
The View menu provides multiple ways to configure a system or view system properties.
Options are specific to each individual view. To display the view menu, click the View menu
at the top of the Storage Center window.
Once a View window is open, the tab for that view appears at the top of the window.
Figure 7. Open View Tabs
If a tab is displayed, click the tab to display the view window. View windows remain open
during a Storage Management session. Close a view window and tab by clicking on the X
in the right corner of the tab. If more tabs are available than can be displayed, click the scroll
arrows at the far right of the tabs to scroll through the open tabs. Selecting a view that is
already opened displays the window; it does not open a second window. Set Update
Frequency, Find, and Scroll Setting appear at the top of most views.