User's Manual

219
Configuring System Access via IP Filtering
The window displays the following buttons:
• New Filter: This option has the same selections as when creating an IP Filter as shown
in Figure 179 on page 216.
• Modify Filter: This option has the same selections as shown in Figure 179 on page 216
and when entering an IP Address as shown in Figure 180 on page 217. If a modification
would disallow all access for the current User Name and IP Address, a warning
message will appear.
• Delete Filter: This option deletes the selected IP filter. Do not delete an IP Filter that
provides access for the current User ID and IP Address.
• Close: Closes the Manage IP Filters wizard. If deletion of the selected filter would
disallow all access for the current User Name and IP Address, a warning message will
appear.
Viewing Access Violations
From the Storage Management menu, choose System > Access > IP Filtering > Access
Violation Viewer . The Access Failures window appears. This window reports failures by:
• User Name
• IP Address
• Time