User's Manual

410 Storage Center 5.5 System Manager User Guide
Configuring a UPS
Figure 325. APC Trap Receivers
12 Click Add Trap Receiver. The Trap Receiver window appears.
Figure 326. APC Add Trap
13 Enable trap generation for this trap receiver.
14 In the NMS IP/Host name field, enter the following:
• For a single-controller Storage Center system, enter the controller IP address .
• For a dual-controller Storage Center system, enter the IP address of the
Management controller.
The default, 0.0.0.0, leaves the trap receiver undefined.
15 In the SNMPv1 field, enter Public (the default).