Manualshelf

User's Manual

ManualsBrandsDell ManualsStorageDell Dell Compellent Series 40
439440441442443444445446447448
433
Port
The physical connection point on servers, switches, Storage Center controller, and disk drive enclosures
that is used to connect to other devices in the system. Ports on a FC network are identified by their
Worldwide Port Name (WWPN); on iSCSI networks, ports are given an iSCSI name.
Preallocation
Pre-allocating storage physically assigns storage to the volume before its use by the server. Not allowed for
volumes already having Replays.
Q
QoS Definition
Quality of Service. A networking term that specifies a guaranteed throughput level to guarantee end-to end
latency will not exceed a specified level.
R
RAID (Redundant Array of Independent Disks)
A way of encoding data over multiple physical disks to ensure that if a hard disk fails a redundant copy of
the data can be accessed instead. Example schemes include mirroring and RAID-5.
RAID 0
Stripes data but provides no redundancy. If one disk fails, all data is lost. Do not use RAID 0 unless data is
back-up elsewhere.
RAID 5-5 and 5-9
Maintains a logical copy of the data using a mathematically derived rotating parity stripe across 5 or 9 disks.
The parity stripe is derived from the data stripes. This method has less overhead for the redundant
information than RAID 10; however write performance is slower than RAID 10 due to the calculation of the
parity stripe for every write.RAID 5 protects against data loss when any single disk fails. RAID 5-5 is 80%
efficient. RAID 5-9 is 89% efficient.
RAID 6-6 and 6-10
RAID 6 protects against data loss when any 2 disks fail. RAID 6-6 is 67% efficient. RAID 6-10 is 80%
efficient.
RAID 10
Striped and mirrored. Provides both data availability and top performance. Maintains a minimum of one full
copy of all data on the volume. RAID 10 provides optimum Read / Write performance, increased probability
of withstanding multiple failures, and the fastest restoration of data.
RAID 10-DM
RAID 10 Dual Mirror provides maximum protection for storage. Data is written simultaneously to three
separate disks. All three disks return a write acknowledgement. RAID 10 protects against data loss when
any 2 disks fail.