Dell Universal Dock TM D6000 User Guide
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Package Contents a. Dell Universal Dock (D6000) b. Power adapter and power cord a b Specifications Upstream • USB 3.0 Type A (Via C-to-A converter) • USB-C (Support power delivery up to 65W) Downstream • 3 x USB 3.0 Type A • 1 x USB 3.0 Type A (front, PowerShare) • 1 x USB-C (front, Data only, and PowerShare) • 1 x HDMI • 2 x DisplayPort • Gigabit Ethernet • Combo Audio (Headphone/Mic) • Audio Line out Supports USB 3.1 Gen1.
Maximum resolution and refresh rate supported for your display: Note: Maximum Resolution/Refresh Rate will also depend on EDID table of monitors USB-C platform users with driver install Inputs (plug in) Output DP-1 DP-2 HDMI DP-1 DP-2 HDMI DP-1 DP-2 HDMI DP-1 DP-2 DP-1 DP-2 4K@60Hz 4K@60Hz 5K@60Hz 4K@60Hz HDMI DP-2 DP-1 4K@30Hz 4K@30Hz 4K@60Hz 4K@60Hz 4K@60Hz HDMI DP-1 HDMI 4K@60Hz 4K@60Hz 4K@60Hz DP-2 4K@60Hz HDMI 4K@60Hz * If without DisplayLink driver, HDMI out will be fro
Product Overview Front View USB-C USB 3.0 USB 3.0 Audio Combo Back View Audio line out USB 3.0 USB 3.
Recommended System Requirements Hardware DL-6xxx devices (4K UHD resolutions) Minimum Requirements for Office, Productivity, Web Processor: Intel Core i3 2+GHz / Intel Core M / AMD Trinity or better Memory: 4GB Video Card: Intel HD 4000, ATI Radeon HD7xxx, NVidia GeForce 5xxM or better, with drivers released specifically for the Windows version. USB: USB 2.0 but USB 3.
Windows 7/8/8.1/10 Setup 1. Start to install the drivers first before connecting the Dock to your computer. It is recommended to download the latest drivers from below support website: · dell.com/support · displaylink.com/downloads For network/IT administrators, please visit this link for a corporate installation software package. (*User registration required) http://www.displaylink.com/corporateinstall/ Note: Windows will start installing the DisplayLink driver automatically if connected to Internet.
3-1-a. USB-C platform/connection USB-C 3-1-b. Connect your dock and peripherals to your PC. 3-2-a. USB 3.0 Type A platform/connection USB-A 3-2-b. Connect your dock and peripherals to your PC.
Features 9
DisplayLink Manager Menu Menu Option Description DisplayLink Manager Clicking on this item will show the version of DisplayLink software installed. Check for Updates Windows update checking. DisplayLink Devices Connected DisplayLink devices checking. Audio Setup Opens the Windows Audio Configuration window. Video Setup Opens the Windows Screen Resolution window. Screen Resolution Displays a list of available resolutions.
Fit to TV configuration 1. To configure Fit to TV, choose the option from the DisplayLink GUI. The following interface appears: 2. You will also see a red border on the DisplayLink screen. The red border shows the size of the new Windows desktop. Use the “+” and “-” controls on the Fit to TV GUI to change the size of the red border until it fits on the TV screen. Note: Finer configuration of the size of the border can be achieved by holding down the CTRL key and clicking the “+” and “-”. 3.
FAQs of Dell Universal Dock - D6000 Troubleshooting Suggested Solutions There is no video on the monitor Check the video connection cables. attached to the dock. Unplug from the power, wait 10 seconds, and then reconnect. The video on the attached monitor Check video connection cables. is distorted or corrupted. Check the video resolution under Control Panel Items\ Display\Change Display Setting. The video on the attached monitor Change the settings by either: is not displaying in extended mode.
Troubleshooting Suggested Solutions First time Internet access causing Download the driver from an Internet connected computer error message and copy the driver over USB flash drive, and run the setup. This can occur when entering extend mode with low Insufficient system resources exist to complete the requested service system resources. The PC does not have enough memory to start an extend display. Close down any unused applications. The situation may also be improved by rebooting the PC.
Troubleshooting No video on the monitors Suggested Solutions 1. If your monitor is connected to the dock, the video attached to High Definition output on your computer may be disabled. You can Multimedia Interface (HDMI), enable the video output under Control Panel or DisplayPort (DP) port on the Items\Display\Change Display Setting. dock. 2. Check the resolution settings on your computer. Your monitor may support higher resolutions than what the dock is able to support.
