User Manual

Table Of Contents

Setting up the monitor │ 33

Setting up the monitor

Connecting the stand

NOTE: The stand is detached when the monitor is shipped from the

factory.

NOTE: The following procedure is applicable for the stand that shipped

with your monitor. If you are connecting a third-party stand, see the

documentation that shipped with the stand.

1. Follow the instructions on the aps of carton to remove the stand from the top

cushion that secures it.

2. Remove the stand riser and stand base from the packaging cushion.

NOTE: The graphics are used for the purpose of illustration only. The

appearance of the package cushion may vary.

3. Insert the stand base blocks fully into the stand slot.

4. Lift the screw handle and turn the screw clockwise.

5. After fully tightening the screw, fold the screw handle flat within the recess.