User Manual

50 │ Operating your monitor
Reset Color
Resets your monitor’s color settings to the factory
default.
Display Use the display to adjust image.
Brightness/Contrast
Input Source
Auto Adjust
2X Monitor
Color
Display
Menu
Personalize
Others
Exit
Normal
50
16 : 9
Aspect Ratio
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Response Time
Reset Display
ColorColor
Aspect Ratio Adjusts the image ratio to 16:9, 4:3 or 5:4.
Horizontal
Position
Use or to adjust the image left or right.
Minimum is ‘0’ ( ).
Maximum is ‘100’ ( ).
Vertical
Position
Use or to adjust the image up or down.
Minimum is ‘0’ ( ).
Maximum is ‘100’ ( ).
NOTE: Horizontal Position and Vertical Position
adjustments are only available for VGA input.
Sharpness This feature can make the image look sharper or softer.
Use or to adjust the sharpness from 0 to 100.
Pixel Clock The Phase and Pixel Clock adjustments allow you to
adjust your monitor to your preference.
Use or to adjust for best image quality.
Phase If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment
and then use Phase (fine), again.
NOTE: Pixel Clock and Phase adjustments are only
available for VGA input.