Owner's manual

Diskette Configuration Submenu


Event Log Configuration Submenu


Maximum Capacity
Displays the maximum capacity of the primary IDE device.
LBA Mode Control
Displays whether LBA mode control is enabled or not on the primary IDE device.
Multi-Sector
Transfers
Displays the multi-sector transfer setting of the primary IDE device.
PIO Mode
Displays the PIO mode setting of the primary IDE device.
Ultra DMA
Displays the ultra DMA setting of the primary IDE device.
Cable Detected
Displays the type of cable connected to the primary IDE device.
Option
Function
Diskette Controller
Configures the floppy drive interface. Options are Enabled (default) and Disabled.
Diskette A
Selects the floppy drive type from Not Installed, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3 1/2", 1.44/1.25 MB 3 1/2", or 2.88 MB 3
1/2".
Diskette Write
Protect
Protects a floppy disk from being written to when set to Enabled. When this option is set to Disabled (default), the floppy disk is not
protected unless the write-protect tab is in place.