Dell OptiPlex 3070 Micro Setup and Specifications Regulatory Model: D10U Regulatory Type: D10U003
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Set up your computer.....................................................................................................................................5 2 Chassis.......................................................................................................................................................... 7 Front view..........................................................................................................................................................................
Updating the BIOS in Windows ..................................................................................................................................... 31 Updating BIOS on systems with BitLocker enabled...............................................................................................31 Updating your system BIOS using a USB flash drive.............................................................................................
1 Set up your computer 1 Connect the keyboard and mouse. 2 Connect to your network using a cable, or connect to a wireless network. 3 Connect the display. NOTE: If you ordered your computer with a discrete graphics card, the HDMI and the display ports on the back panel of your computer are covered. Connect the display to the discrete graphics card. 4 Connect the power cable. 5 Press the power button. 6 Follow the instructions on the screen to finish Windows setup: 7 a Connect to a network.
Table 1.
2 Chassis This chapter illustrates the multiple chassis views along with the ports and connectors and also explains the FN hot key combinations. Topics: • Front view • Micro computer view Front view 1 Power button and power light/diagnostic LED 2 Hard drive activity light 3 Headset/Universal audio jack port 4 Line-out port 5 USB 3.
Micro computer view Back view 1 External antenna connectors 2 DP1.2/HDMI2.0/VGA/Serial/Serial-PS/2 (Optional) 3 USB 2.0 port 4 Cable holder 5 USB 3.1 Gen 1 ports (2) 6 Padlock ring 7 Network port 8 USB 2.
3 System specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.
Processor NOTE: Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide.
Intel Core Processors 9th Gen Core CPUs Tower/ Micro Small Form Factor Intel® Core™ i3-9300T (4 Cores/8MB/4T/ 3.2GHz to 3.8GHz/35W); supports Windows 10/ Linux GSP DG/CG Ready x x Intel® Core™ i5-9400 (6 Cores/9MB/6T/ x 2.9GHz to 4.1GHz/65W); supports Windows 10/ Linux Intel® Core™ i5-9400T (6 Cores/9MB/6T/ 1.8GHz to 3.4GHz/35W); supports Windows 10/ Linux x x x Intel® Core™ i5-9500 (6 Cores/9MB/6T/ 3.0GHz to 4.4GHz/65W); supports Windows 10/ Linux x Intel® Core™ i5-9500T (6 Cores/9MB/6T/ 2.
Intel Core Processors 8th Gen Core CPUs Tower Small Form Factor Micro GSP DG/CG Ready Intel Core i5-8500T (6 Cores/9 MB/6T/up to 3.5 GHz/35 W); supports Windows 10/Linux No No Yes GSP Yes Intel Core i5-8400T (6 Cores/9 MB/6T/up to 3.3 GHz/35 W); supports Windows 10/Linux No No Yes GSP Yes Intel Core i3-8300T (4 Cores/8 MB/4T/3.2 GHz/35 W); supports Windows 10/Linux No No Yes Yes Intel Core i3-8100T (4 Cores/6 MB/4T/3.
Intel Optane Memory NOTE: Intel Optane memory cannot replace DRAM entirely. However, these two memory technologies complement each other within the PC. Table 6. M.2 16 GB Intel Optane Tower/Small form factor/Micro Capacity (TB) 16 GB Dimensions (inches) (W x D x H) 22 x 80 x 2.38 Interface type and Maximum speed PCIe Gen2 MTBF 1.6 M hours Logical Blocks 28,181,328 Power Source: Power Consumption (reference only) Idle 900 mW to 1.2 W, Active 3.
Tower Small form factor Micro 3.5 inch 1 TB 7200 RPM HDD Y Y N 3.5 inch 2 TB 7200 RPM HDD Y Y N 2.5 inch 500 GB 5400 RPM HDD Y Y Y 2.5 inch 512 GB 7200 RPM HDD Y Y Y 2.5 inch 512 GB 7200 RPM SED HDD Y Y Y 2.5 inch 1 TB 7200 RPM HDD Y Y Y 2.5 inch 2 TB 5400 RPM HDD Y Y Y M.2 1 TB PCIe C40 SSD Y Y Y M.2 256 GB PCIe C40 SSD Y Y Y M.2 512 GB PCIe C40 SSD Y Y Y M.2 128 GB PCIe NVMe Class 35 Solid State Drive Y Y Y M.
Graphics and Video Controller NOTE: Tower supports Full Height (FH) cards and Small Form Factor supports low profile (LP) cards. Table 9.
Communications – Integrated Table 11. Communications – Integrated Realtek RTL8111HSD-CG Tower/Small Form Factor/Micro Realtek RTL8111HSD-CG Gigabit Ethernet LAN 10/100/1000 Integrated on system board External ports and connectors NOTE: Tower supports Full Height (FH) cards and Small Form Factor supports Low Profile (LP) cards. See chassis diagrams section for port/connector locations. Table 12. External ports / connectors Tower Small Form Factor Micro USB 2.
System board connector maximum add-in card allowable dimensions Table 13. System board connector maximum add-in card allowable dimensions Tower Small Form Factor Micro PCIe x16 Connector (BLUE) (Voltage supported 3.3V/12V) 1 1 NA Height (inches / centimeters) 4.38 / 11.12 2.73 / 6.89 NA Length (inches / centimeters) 6.6 / 16.77 6.6 / 16.77 NA Maximum Wattage 75 W 50 W NA PCIe x1 Connector (Voltage supported 3.3/12V) 3 1 NA Height (inch / cm) 4.38 / 11.12 2.73 / 6.
Operating system Tower/Small form factor/Micro Platforms Qualified on specific versions of Windows 10 This website also includes a matrix of other platforms qualified on specific versions of Windows 10. Power NOTE: These form factors utilize a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave.
Tower Small Form Factor Micro Compliance: ErP Lot6 Tier 2 0.5watt requirement Yes Yes Yes Yes Yes Yes NA 80Plus Certified No Yes Yes No Yes Yes No FEMP Standby Power Compliant Yes Yes Yes Yes Yes Yes No Table 16. CMOS battery 3.0v CMOS battery (Type and estimated battery life): Brand JHIH HONG PANASONIC MITSUBISHI SHUNWO & KTS 1 Power Type Voltage Composition Life CR2032 3V Lithium Continuous Discharge Under 15 kΩ Load to 2.5 V End-Voltage.
Regulatory and Environmental Compliance Product related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility (EMC), Ergonomics, and Communication Devices relevant to this product may be viewed at www.dell.com/regulatory_compliance. The Regulatory Datasheet for this product is located at http://www.dell.com/regulatory_compliance.
4 System setup System setup enables you to manage your hardware and specify BIOS level options.
Keys Navigation Spacebar Expands or collapses a drop-down list, if applicable. Tab Moves to the next focus area. Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message that prompts you to save any unsaved changes and restarts the system. System setup options NOTE: Depending on the and its installed devices, the items listed in this section may or may not appear. General options Table 19.
System information Table 20. System Configuration Option Integrated NIC Description Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is not selected by default. The options are: • • • Disabled Enabled Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
Option Description • • • • • • • 15 days 30 days 60 days 90 days 120 days 150 days 180 days Video screen options Table 21. Video Option Description Primary Display Allows you to select the primary display when multiple controllers are available in the system. • • Auto (default) Intel HD Graphics NOTE: If you do not select Auto, the on-board graphics device will be present and enabled. Security Table 22.
Option Description • • • • • • • • TPM On (default) Clear PPI Bypass for Enable Commands PPI Bypass for Disable Commands PPI Bypass for Clear Commands Attestation Enable (default) Key Storage Enable (default) SHA-256 (default) Choose any one option: • • Absolute Disabled Enabled (default) This field lets you Enable, Disable or Permanently Disable the BIOS module interface of the optional Absolute Persistence Module service from Absolute Software.
Option Description • Expert key Management Audit Mode Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are: • • • • PK (default) KEK db dbx If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear.
Performance Table 25. Performance Option Description Multi Core Support This field specifies whether the process has one or all cores enabled. The performance of some applications improves with the additional cores. • • • • All—Default 1 2 3 Allows you to enable or disable the Intel SpeedStep mode of processor. Intel SpeedStep • Enable Intel SpeedStep This option is set by default. Allows you to enable or disable the additional processor sleep states.
Option Description This option is set to Power Off by default. Enable Intel Speed Shift Technology Allows you to enable or disable Intel Speed Shift Technology support. The option Enable Intel Speed Shift Technology is set by default. Auto On Time Sets time to automatically turn on the computer. Time is kept in standard 12-hour format (hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields.
Option Description • • 5 seconds 10 seconds Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full Screen Logo is not set by default. Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any one of the option: • • • Prompt on Warnings and Errors (default) Continue on Warnings Continue on Warnings and Errors Manageability Table 28.
Option Description The options are: • • WLAN/WiGig Bluetooth All the options are enabled by default. Maintenance Table 31. Maintenance Option Description Service Tag Displays the service tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. SERR Messages Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled.
Option Description • • Disabled - ASPM power management is turned off at all time L1 Only - ASPM power management is set to use L1 Updating the BIOS in Windows It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available. NOTE: If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the BIOS update is completed. 1 Restart the computer. 2 Go to Dell.com/support.
6 The system will boot to a Diag C:\> prompt. 7 Run the file by typing the full filename e.g. O9010A12.exe and press Return. 8 The BIOS Update Utility will load, follow the instructions on screen. Figure 1. DOS BIOS Update Screen Updating the Dell BIOS in Linux and Ubuntu environments If you want to update the system BIOS in a Linux environment such as Ubuntu, see https://www.dell.com/support/article/us/en/19/ sln171755/.
CAUTION: Do not power off the system during the BIOS update process. Powering off the system could make the system fail to boot. 1 From a power off state, insert the USB key where you copied the flash into a USB port of the system . 2 Power on the system and press the F12 key to access the One-Time Boot Menu, Highlight BIOS Update using the mouse or arrow keys then press Enter. 3 The Bios flash menu will open then click the Flash from file.
5 Once the file is selected, Double click the flash target file, then press submit . 6 Click the Update BIOS then system will reboot to flash the BIOS.
7 Once complete, the system will reboot and the BIOS update process is completed. System and setup password Table 34. System and setup password Password type Description System password Password that you must enter to log on to your system. Setup password Password that you must enter to access and make changes to the BIOS settings of your computer. You can create a system password and a setup password to secure your computer.
3 • Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`). Type the system password that you entered earlier in the Confirm new password field and click OK. 4 Press Esc and a message prompts you to save the changes. 5 Press Y to save the changes. The computer reboots.
5 Software This chapter details the supported operating systems along with instructions on how to install the drivers. Downloading drivers 1 Turn on the . 2 Go to Dell.com/support. 3 Click Product Support, enter the Service Tag of your , and then click Submit. 4 Click Drivers and Downloads. 5 Select the operating system installed on your . 6 Scroll down the page and select the driver to install. 7 Click Download File to download the driver for your .
USB drivers Verify if the USB drivers are already installed in the computer. Network adapter drivers Verify if the Network adapter drivers are already installed in the system. Realtek Audio Verify if audio drivers are already installed in the computer. Storage controller Verify if the storage control drivers are already installed in the system.
6 Getting help Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1 Go to Dell.com/support. 2 Select your support category.
