Reference Guide

"verify_data" option will check for data consistency issues in the filesystem.
This might take long time to complete.
Do you want to continue (yes/no) [n]? y
Please enter the administrator password:
Filesystem check started successfully.
To see the status, please execute "maintenance --filesystem--scan_status".
If you enter the maintenance --filesystem --scan_restart command when the DR Series system is not in Maintenance
mode, the following output is displayed at the system prompt:
maintenance --filesystem --scan_restart
"Operation not supported as system is not in maintenance mode.
To be able to restart scan, filesystem check must be running or waiting".
maintenance --filesystem [--stop_scan]
Description
Stops the filesystem scan process that verifies the data contained in a DR Series system.
Syntax
maintenance --filesystem --stop_scan
Result
This operation will stop the filesystem checker and put the system back into
operational mode.
Do you want to continue (yes/no) [n]? y
Please enter the administrator password:
Filesystem check stopped successfully.
maintenance --filesystem [--scan_status]
Description
Displays the current filesystem checker status and scan progress for a DR Series system.
Syntax
maintenance --filesystem --scan_status
Result
Filesystem checker : Scan in progress
Filesystem check status:
DataBlock Consistency Checker Stats
===================================
Phase : INODE CRAWL
Inode check : IN PROGRESS
Inodes processed : 3200 / 3498
Time left (approx) : 4 secs
Cont Name TotalInodes Checked Corrupted Missing Data
Orphan Status
-----------------------------------------------------------------------------
backup 0
0 0 0 0 COMPLETED
container29 0 0
0 0 0 COMPLETED
backupswsys-60_replicate
71826
71826 0 0 0 COMPLETED
113