Reference Guide
System
This DR Series system CLI command and its options allow you to perform the a variety of system-related tasks, including
the following:
• Displaying the current system configuration
• Initializing, rebooting, or shutting down the DR Series system
• Upgrading the DR Series system software
• Configuring the compression type to use on the stored data
• Setting the system date and time
• Setting the network time protocol (NTP)
• Updating the login password
• Enabling or disabling telnet access
• Enabling or disabling marker detection status
• Enabling or disabling encryption at rest
NOTE: For information on the system --datacheck commands that are associated with the Data Check feature, see
system --datacheck.
System Command Usage
This topic introduces the system command usage:
• system --show [options]
• system --reboot
• system --shutdown
• system --upgrade
• system --license [options]
• system --setname --name
• system --setcompression [options]
• system --setdate [options]
• system --setntp [options]
• system --setlogin
• system --telnet [options]
• system --datacheck [options]
• system --marker [options]
• system --add_storage --enclosure
(Option only available on a physical hardware DR Series system)
• system --storage [options]
• system --mgmt_traffic
(Option only available on a physical hardware DR Series system)
• system --backup_traffic
(Option only available on a physical hardware DR Series system)
• system --replication_traffic
(Option only available on a physical hardware DR Series system)
• system --opdup_traffic
(Option only available on a physical hardware DR Series system)
• system --encryption
NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide
the correct value or option.
78