White Papers

48 Setting Up the Dell™ DR Series System as a CIFS or VTL Backup Target on EMC® Networker® | April 2015
4. After the device scan, the NDMP VTL should now appear and can be configured for use. Select the
library within the storage nodes navigation tree and proceed with the Configure Library option. In
the Configure Library dialog box, Check All drives and click the Start Configuration button.
5. The VTL should now appear ready for use. By default, the cleaning option is enabled, and it must
be disabled. Within the navigation tree, select the Library, and then select the Properties option. In
the dialog box, disable the Auto-clean option and omit the default slot and cleanings settings.
Click OK to save the changes.