Administrator Guide

System Event Message Description/Meaning or Action
Seeding cannot contact the target device. Check to make sure that the target device is available and
write-enabled. Then remove and re-add the target device.
Seeding process complete. Informational message. No user intervention is required.
System has reached space full condition, seeding will
be stopped.
Informational message. No user intervention is required.
Seeding failed to create Zero log entries. Switch to maintenance mode to correct the issue.
Found corrupted stream on seeding device. This error
will be rectified during replication re-sync done on this
seed data.
Informational message. No user intervention is required.
Seeding device metadata info file missing, unable to
import.
Seeding device mount not accessible.
Seeding export paused as the device contains data
from another seeding job.
Cleanup the device and re-add to continue seeding.
Seeding encountered error.
Unable to decrypt the Seeding data. Please check that the "password" and "encryption type"
matches the Seeding export job.
System diagnostics partition is running low on space. Please copy out the old diagnostics bundles and delete for
future auto diagnostics collection.
Appliance available storage level is below the set
threshold.
Please schedule filesystem cleaner or expire older backups.
Primary Keystore corruption detected. Run filesystem scan with data verification check.
System Event = Type 2
Data check configuration successful. Informational message. No user intervention is required.
Successfully < variable > system marker. Informational message. No user intervention is required.
< variable > OPDUP encryption updated to < variable > Informational message. No user intervention is required.
System storage usage alert has been set at < level >. Informational message. No user intervention is required.
Successfully < variable > container < variable > with the
following marker(s) "< markers >".
Informational message. No user intervention is required.
Container < name > created successfully. Informational message. No user intervention is required.
Container < name > marked for deletion. For more information, see Deleting Containers. Use the DR
Series system CLI maintenance --filesystem --reclaim_space
command to recover this storage space.
Container < name > has been deleted. Informational message. No user intervention is required.
Successfully renamed container < name > as < name >. Informational message. No user intervention is required.
163