CLI Guide

*** Checking NTP configuration
Network time is enabled.
System is configured with following NTP servers:
0.centos.pool.ntp.org
1.centos.pool.ntp.org
2.centos.pool.ntp.org
Checking if NTP servers are reachable...
Pinging 0.centos.pool.ntp.org
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 75.696/76.042/76.541/0.506 ms
Pinging 1.centos.pool.ntp.org
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 49.150/50.098/52.292/1.212 ms
Pinging 2.centos.pool.ntp.org
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 77.854/77.999/78.075/0.085 ms
*** Checking DNS configuration
DNS Suffix: storage.local
Primary Nameserver: 10.25.19.5
Secondary Nameserver: 10.25.19.6
Pinging 10.25.19.5
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 0.253/0.451/1.123/0.336 ms
Pinging 10.25.19.6
Ping successful. No packet loss.
RTT timings min/avg/max/mdev = 0.239/0.537/1.149/0.326 ms
*** Checking Active Directory configuration
AD configuration: This node has not joined any domain.
*** Checking NIS configuration
NIS domain configuration not found.
*** Checking NFS and CIFS clients configured for various containers
NFS/CIFS clients configured for containers:
-no specific clients-
*** Checking if there is another host with same name
Local system name: acme-01.storage.local
Local system IP: 10.25.20.23
Pinging acme-01.storage.local 3 times
Got IP address as 10.25.20.23
Got IP address as 10.25.20.23
Got IP address as 10.25.20.23
No duplicate hostname found on the network.
*** Checking portmapper
portmap (pid 3716) is running
Checking ports currently being used by portmapper
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
network --troubleshoot --gateway --interface <bondN | ethN>
Description
Performs a basic troubleshooting on the current state of the gateway connected to the DR Series system.
Syntax
network --troubleshoot --gateway --interface bond0
48