Owners Manual

Quick Sync indicator codes
Figure 6. Quick Sync
1. Quick Sync Status Indicator
2. Quick Sync Activation Button
Table 9. Quick Sync indicator codes
Quick Sync indicator
pattern
Condition
Slow blink Quick Sync is waiting to be configured from iDRAC.
Solid Quick Sync is ready to transfer.
Blinks three times rapidly
and then turns off
Quick Sync feature is disabled from iDRAC.
Blinks continuously when
the mobile device touches
antenna
Indicates data transfer activity.
Blinks rapidly continuously
when the activation button
is pressed
Quick Sync hardware is not responding properly.
Turns off Indicates that the Quick Sync feature is turned off. Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it indicates that power is not delivered to the Quick Sync
bezel.
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag are found
on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Documentation matrix
The documentation matrix describes documents for setting up and managing your system.
Table 10. Documentation matrix
To... Refer to...
Install your system into a rack Rack documentation included with your rack solution.
Set up your system and know the system technical specifications Getting Started With Your System that shipped with your system
or see Dell.com/support/home
16 Dell DR4300 system overview