Administrator Guide

System Event Message Description/Meaning or Action
Container < variable > added to seeding. Informational message. No user intervention is required.
Container < variable > is removed while seeding is in
progress.
Informational message. No user intervention is required.
Container < variable > removed from seeding. Informational message. No user intervention is required.
Seeding job created. Informational message. No user intervention is required.
Seeding job deleted. Informational message. No user intervention is required.
Seed space reclamation triggered. Informational message. No user intervention is required.
Unable to use old seed dict. Creating a new dict. Informational message. No user intervention is required.
Unable to read bmap scid. Retry seeding after running
filesystem scan.
Retry seeding after running filesystem scan.
Unable to read DS scid. Retry seeding after running
filesystem scan.
Retry seeding after running filesystem scan.
Seeding device mount not accessible. Check the CIFS
mount and re-add the device to continue.
Check the CIFS mount and re-add the device to continue.
System Event = Type 4
Internal Error. Unable to load deduplication dictionary
< variable >.
Use the DR Series system CLI maintenance --configuration --
reinit_dictionary command. If this issue persists, contact Dell
Support for assistance or intervention.
Internal Error. Unable to locate deduplication
dictionary < variable >.
Use the DR Series system CLI maintenance --configuration --
reinit_dictionary command. If issue persists, contact Dell
Support for assistance or intervention.
Filesystem cleaner run < variable > started. Informational message. No user intervention is required.
Filesystem cleaner run < variable > completed in
< variable > milliseconds (ms).
Informational message. No user intervention is required.
Filesystem cleaner process encountered input/output
(I/O) errors.
Maintenance-based issue with the DR Series system. Check
status using Maintenance mode or DR Series system CLI
commands. Contact Dell Support as needed.
Failure to sync NVRAM < variable >. NVRAM hardware issue with the DR Series system. Check
status using Maintenance mode or DR Series system CLI
commands.
Failure reading from NVRAM < variable >. NVRAM hardware issue with the DR Series system. Check
status using Maintenance mode or DR Series system CLI
commands.
Failure writing to NVRAM < variable >. NVRAM hardware issue with the DR Series system. Check
status using Maintenance mode or DR Series system CLI
commands.
Failure to write sync NVRAM < variable >. NVRAM hardware issue with the DR Series system. Check
status using Maintenance mode or DR Series system CLI
commands.
171