Owners Manual

CAUTION: Muchas de las reparaciones solo pueden llevarse a cabo por un técnico de servicio certificado. Solo debe
ejecutar soluciones de problemas y realizar las reparaciones sencillas de acuerdo con la autorización de la
documentación del producto o según lo indicado por el servicio y asistencia en línea o telefónica. Los daños ocasionados
por reparaciones que no estén autorizadas por Dell no están cubiertos por la garantía. Lea y siga las instrucciones de
seguridad que se suministran con el producto.
Steps
1. Loosen the captive screws that secure the network daughter card (NDC) to the system board.
2. Hold the NDC by the edges on either side of the touch point and lift the card to remove it from the connector on the system board.
3. Slide the NDC away from the back of the system until the Ethernet connectors are clear of the slot in the back panel.
4. Lift the NDC out of the chassis.
Figure 51. Removing the NDC
1.
captive screw socket (2) 2. connector on the system board
3. captive screw (2) 4. touch point (2)
5. network daughter card (NDC) 6. back panel slot for Ethernet connectors
Next steps
1. Install the NDC.
2. If removed, install the expansion card(s) on the expansion card riser 2.
3. Follow the procedure listed in the After working inside your system section.
Related tasks
Antes de trabajar en el interior de su equipo
Extracción de una tarjeta de expansión del soporte vertical para tarjetas de expansión 2 o 3
Instalación de una tarjeta de expansión en el soporte vertical para tarjetas de expansión 2 o 3
Installing the network daughter card
Después de trabajar en el interior de su equipo
Instalación y extracción de los componentes del sistema
111