Owners Manual

Dell DR4300e system overview

Your Dell DR4300e system is 2U rack server that supports up to two Intel Xeon E5-2620 v3 processors, up to 24 DIMMs, and twelve 3.5-

inch hard drives and 2 optional 2.5-inch back-accessible hard drives for the operating system.

Topics:

• Front panel features and indicators

• Back panel features

• Indicadores de diagnóstico del panel frontal

• Documentation matrix

Front panel features and indicators

The front panel provides access to the features available on the front of the server, such as the power button, NMI button, system

identification tag, system identification button, and USB and VGA ports. The diagnostic LEDs or the LCD panel is prominently on the front

panel. The hot swappable hard drives are accessible from the front panel.

Figure 1. Dell DR4300e system front panel features and indicators

System identification button 2. Power button

3. NMI button 4. Information tag

5. Hard drives 6. USB management port/iDRAC Direct

7. Video connector 8. Quick Sync

Table 1. Front panel features and indicators

Item Indicator, Button, or

Connector

Icon Description

1 System identification button Enables you to locate a particular system within a rack. The

identification buttons are on the front and back panels.

Press the system identification button to turn the system ID on or

off.

NOTE:

• If the system stops responding during POST, press

and hold the system ID button (for more than five

seconds) to enter BIOS progress mode.

• To reset the iDRAC (if not disabled in F2 iDRAC set

up) press and hold the button (for more than 15

seconds).

8 Dell DR4300e system overview