Owners Manual

Siguientes pasos
1. Instale las tarjetas verticales de expansión.
2. Siga el procedimiento que se describe en la sección Después de trabajar en el interior del sistema.
Tareas relacionadas
Antes de trabajar en el interior de su equipo
Removing expansion card risers
Instalación de soportes verticales para tarjetas de expansión
Después de trabajar en el interior de su equipo
Referencia relacionada
Instrucciones de seguridad
Removing expansion card risers
Prerequisites
CAUTION: Muchas de las reparaciones solo pueden llevarse a cabo por un técnico de servicio certificado. Solo debe
ejecutar soluciones de problemas y realizar las reparaciones sencillas de acuerdo con la autorización de la
documentación del producto o según lo indicado por el servicio y asistencia en línea o telefónica. Los daños ocasionados
por reparaciones que no estén autorizadas por Dell no están cubiertos por la garantía. Lea y siga las instrucciones de
seguridad que se suministran con el producto.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If installed, remove any expansion card installed on risers 2 and 3.
NOTE: The expansion card riser 1 can be used only when both the processors are installed.
Steps
1. Holding the slots on the expansion card riser, lift the riser from the riser connector on the system board.
2. To remove expansion card risers 2 and 3, hold the edges of the expansion card riser, and lift the riser from the riser connector on the
system board.
NOTE:
To ensure proper system cooling, the riser 1 blank must be installed in the riser 1 slot. Remove the riser 1
blank only if you are installing riser 1.
Instalación y extracción de los componentes del sistema 99