White Papers

5 Setting Up the Dell
™
DR Series System on Veeam | April 2016
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series system, and power it on.
In the
Dell DR Series System Administrator Guide , refer to the sections, “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using RACADM”
for information about using iDRAC connection and initializing the appliance.
2. Log on to iDRAC by using the default address 192.168.0.120, or the IP address that is assigned to
the iDRAC interface. Use the user name and password of “root/calvin” and then launch the virtual
console.
3. When the virtual console is open, log on to the system as the user administrator with the
password St0r@ge! (The “0” in the password is the numeral zero).