White Papers

5 Setting Up the Dell™ DR Series System on HP Data Protector® 7.0 | April 2015
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series System, and power it on.
In the Dell DR Series System Administrator Guide , refer to the sections, “iDRAC Connection”,
“Logging in and Initializing the DR Series System”, and “Accessing IDRAC6/Idrac7 Using RACADM” for
information about using the iDRAC connection and initializing the appliance.
2. Log on to iDRAC using the default address 192.168.0.120, or the IP that is assigned to the iDRAC
interface. Use user name and password of “root/calvin”.
3. Launch the virtual console.
4. When the virtual console is open, log on to the system as the user administrator with the password
St0r@ge! (The “0” in the password is the numeral zero).