White Papers
Table Of Contents
- 1 Installing and configuring the DR Series system
- 2 Configuring a backup job on ASG-Time Navigator for a CIFS target
- 3 Configuring a restore job on ASG-Time Navigator over a CIFS target
- 4 Running a duplication and restore job on a secondary CIFS target
- 5 Configuring a backup job on ASG-Time Navigator over an NFS target
- 6 Configuring a restore job on ASG-Time Navigator for an NFS target
- 7 Running a duplication and restore job on a secondary DR Series system NFS target
- 8 Setting up the DR Series system cleaner
- 9 Monitoring deduplication, compression, and performance
- A Best practices for setting up ASG-Time Navigator backup native Virtual Library System (VLS) on a DR Series system
- B Creating a storage device for CIFS
- C Creating a storage device for NFS
- D Launching a Time Navigator administration console on a Linux platform
32 Setting Up the Dellâ„¢ DR Series System as a Backup Target on ASG-TimeNavigator | April 2015
5 Configuring a backup job on ASG-Time Navigator over an
NFS target
This procedure describes how to initiate and configure a backup job using ASG-Time Navigator with the
DR Series system. The high level steps are:
1. Configure an NFS container as a TiNa-library (i.e., backup device).
2. Create a media pool and attach TiNa logical drives to this media pool.
3. Configure a TiNa backup strategy.
4. Select the data to be backed up and start a backup job.
5.1 Configuring the NFS container as a TiNa-library
1. Enter the
tina_adm
command from the <TiNa install path>/Bin directory to open the Time
Navigator- Administration Console-version4.3 and configure the backup device in the form of a
virtual library system. Click Library > Devices > New.