White Papers

5 Setting Up the Dell™ DR Series System as an Archive Target on AppAssure 5.4.3 | April 2015
1 Installing and configuring the DR Series system
1. Rack and cable the DR Series system and power it on.
2. Initialize the DR Series system. For more information about this step, in the
Dell DR Series System
Administrator Guide,
refer to the following topics: “iDRAC Connection,” “Logging in and Initializing
the DR Series System,” and “Accessing iDRAC6/iDRAC7 Using RACADM”.
3. Log on to iDRAC using the default address 192.168.0.120, or the IP address assigned to the iDRAC
interface. Use the user name and password: “root/calvin”.
4. Launch the virtual console.