White Papers

12 Setting Up the Dell™ DR Series System as a CIFS or VTL Backup Target on EMC® Networker® | April 2015
4. Select Reconnect at logon.
5. When prompted, enter the CIFS credential to authenticate on the Active Directory domain.
The DR Series system container is now mounted to your backup server.
6. If Client Direct is used, make sure all the clients can access the same DR container share using this
path. Otherwise, separate Client Direct Paths must be entered with the actual paths that clients
use to access the DR container share (please refer to step 10 in the next section Set up
Networker).
2.3 Configuring Networker to use the newly created network share
1. Open the Networker Management Console (NMC).
2. Click the Enterprise menu button, select the storage node that the DR Series system share will be
configured as a backup device, right-click the host, and then click New > Managed Application.