White Papers

20 Setting Up the Dell™ DR Series System as a CIFS or VTL Backup Target on EMC® Networker® | April 2015
15. Go through the process of creating a new backup group.
16. In Specify the Client Backup Options, define the following settings as follows.
a. Deduplication should be set as None
b. Target Pool should be set as the pool that has the DR Series system device included.
c. Client Direct can be enabled if the client is directly backing up data to a preferred DR, thus
bypassing the storage node that is managing the DR share. For Client Direct to work, the DR
device must have at least one device path that the client can use to directly access the DR
container share. Refer to step 6 in the last section Configure the Networker Storage Node,
and step 10 in this section.