Administrator Guide

注: The DR4000 system supports up to four 1–GbE ports or up to two 10–GbE ports; for the 1–GbE ports,

these are two internal LAN on Motherboard (LOM) ports referenced in item 4 above that reside on the

motherboard, and two ports on an expansion card referenced in item 5 above. If the DR4000 system is using

the two 10–GbE ports, these reside on an expansion card referenced in item 5 above.

5. (DR4100 system appliance) Locate the VGA monitor port and the USB ports on the back of your system. See Figure 3

for the VGA and USB port locations and complete steps 5 to 8.

6. Connect the video monitor to the VGA port on the back of your system (see item 2 in the DR4100 System Rear

Chassis Port Locations table).

7. Connect the USB keyboard to one of the two USB ports on the back of your system (see item 3 in the DR4100

System Rear Chassis Port Locations table).

8. You are now ready to perform initialization using the DR Series system CLI login process. For more information, see

Logging in and Initializing the DR Series System.

图 7: DR4100 System Rear Chassis Port Locations

Item Indicator, Button, or Connector Icon Description

1 iDRAC7 Enterprise port Dedicated management port for the iDRAC7

Enterprise card (port is available only if an iDRAC7

Enterprise license is installed on your system).

2 Video connector Connects a VGA display to the system.

3 USB connectors (2) Connects USB devices to the system. The ports are

USB 2.0-compliant.

4 Ethernet connectors (4) Four integrated 10/100/1000 NIC connectors, or four

integrated connectors that include:

– Two 10/100/1000 Mbps NIC connectors

– Two 100 Mbps/1 Gbps/10 Gbps SFP+/10-

GbE T connectors

5 PCIe expansion card slots (3) Connect up to three full-height PCI Express

expansion cards

6 Hard drives (2) Provides two hot-swappable 2.5-inch hard drives

注

: The DR4100 system supports up to six 1–GbE ports or up to two 10–GbE ports. For the 1–GbE ports,

these are four internal LAN on Motherboard (LOM) ports referenced in item 4 above that reside on the

network daughter card (NDC), and two additional ports on a PCI Express expansion card referenced in item 5

above. If the DR4100 system is using the two 10–GbE ports, these ports reside on the NDC.