Administrator Guide

注: This procedure describes the logging in process from a first-time perspective, starting with the Customer

Registration and Notification page, the completion of the Initial System Configuration Wizard process, and the

Initial Software Upgrade page.

1. In a supported web browser, type the IP address or hostname of the system in the browser Address bar, and press

<Enter>.

The DR Series System Login page is displayed.

注: The DR Series System Login page may display a warning message if the web browser you are using does

not properly support the DR Series system. If you are running a Microsoft Internet Explorer (IE) 8 or later web

browser, make sure that you disable the Compatibility View. For more information about disabling the

Compatibility View settings, see Disabling the Compatibility View Settings. For more information about the

supported web browsers, see the

Dell DR Series System Interoperability Guide, Release 2.0.0.0

注: For best results when using IE web browsers in combination with supported Windows-based servers,

ensure that Active Scripting (JavaScript) is enabled on the Windows client. This setting is often disabled by

default on Windows-based servers. For more information on enabling Active Scripting, see Enabling Active

Scripting in Windows IE Browsers.

注: If you want to reset your login password, click Reset Password on the DR Series System Login page. The

Reset Password dialog is displayed.

The reset options displayed depend on the password reset option you configured earlier. For more information

see, Modifying Password Reseting Options.

By default, the service tag option is displayed. In Service Tag, enter the service tag number ID for the system,

and click Reset Password to reset the system password back to its default setting (or click Cancel to return to

the DR Series System Login page).

2. In Password, type St0r@ge! and click Log in or press <Enter>.

The Customer Registration and Notification page is displayed. Before you can begin using the DR Series system

graphical user interface (GUI), you need to properly register the system with Dell. In addition, this page also allows

you to sign up for notifications about appliance alerts and system software updates. For more information, see

Registering a DR Series System.

3. In the Settings pane of the Customer Registration and Notification page, complete the following:

a) In Contact Name, enter a system contact name.

b) In Relay Host, enter a hostname or IP address for the relay host.

c) In Email Address, enter an email address for the contact.

d) Select Notify me of DR4000 appliance alerts to be notified about system appliance alerts.

e) Select Notify me of DR4000 software updates to be notified about system software updates.

f) Select Don't show me this again to not display the Customer Registration and Notification page again.

g) Click Confirm to have the DR Series system accept your settings (or click Skip without configuring any settings)

to proceed with initialization.

The Initial System Configuration Wizard page is displayed.

4. To start the initial system configuration process, click Yes.

The Initial Configuration — Change Administrator Password page is displayed.

注: If you click No, you will bypass the initial system configuration process, and the DR Series system

Dashboard page is displayed. However, when you next log in to the DR Series system, you will be prompted to

perform the initial system configuration process again with the Initial System Configuration Wizard page is

displayed.

5. In the Settings pane of the Initial Configuration — Change Administrator Password page, complete the following:

a) In Current Password, enter the current administrator password.