Administrator Guide
• Max Speed: 1000baseT/Full
• Duplex: Full
管理 DR Series 系统密码
可以通过两种方法管理登录 DR Series 系统时所使用的登录密码：
• 使用 System Configuration（系统配置）页面中的 Edit Password（编辑密码）选项修改现有登录密码。有
关更多信息，请参阅修改系统密码。
• 使用 DR Series System Login（DR Series 系统登录）页面中的 Reset Password（重置密码）选项将登录密
码重置为默认值。有关更多信息，请参阅重置默认系统密码。
Modifying the System Password
To configure a new password or to modify an existing password for logging in to the DR Series system, complete the
following:
1. To change the system password, do one of the following:.
– In the navigation panel, select System Configuration, the System Configuration page is displayed. Click
Password Management.
– In the navigation panel, select System Configuration → Password, the Password Management page is
displayed.
2. Click Edit Password.
The Edit Password dialog is displayed.
3. In Current password, type the current password for the system.
4. In New password, type the new system password.
5. In Confirm password, retype the new password to confirm this as the new password replacing the existing system
password.
6. Click Change Password (or click Cancel to display the System Configuration page).
If successful, a Password change was successful dialog is displayed.
Resetting the Default System Password
To reset the system to use the default password (St0r@ge! ) for logging in, complete the following:
1. In the Login window, click Reset Password.
The Reset Password dialog is displayed.
If the password reset option is set to Service Tag, proceed to step 2.
If the password reset option is set to Service Tag and Administrator Email, proceed to step 4.
2. In Service Tag, type the Service Tag associated with your system, and click Reset Password.
注: If you are unsure of the Service Tag associated with your DR Series system, it can be found on the
Support page (click Support in the navigation panel to display the Support Information pane, which displays
the Service Tag).
The Login window is displayed, and a Password has been reset dialog is displayed.
3. To log in using the default password, type St0r@ge! , and click Login.
注: After you have reset the login password to its default and logged in to the DR Series system, Dell
recommends for security reasons that you create a new unique login password.
73