Administrator Guide

example, CommVault). Conversely, as a best practice, if you have traffic from a DMA that is not one of the

supported marker types, it is best to disable marker detection for the container by selecting the None marker type.

4. Modify the connection type options for the selected container as needed (containers support None, NFS/CIFS, and

RDA).

– If you want to modify an existing NFS/CIFS, NFS, or CIFS connection type container settings, see the NFS/

CIFS, NFS-only, and CIFS-only options available in Creating an NSF or CIFS Connection Type Container, and

make the corresponding changes.

– If you want to modify the existing OST or RDS connection type container settings, see the options available

in Creating an OST or RDS Connection Type Container , and make the corresponding changes.

– If you want to modify the existing unassigned (None) connection type container settings, see the options

available in Creating An Unassigned Connection Type Container, and make the corresponding changes.

注: If you select Open Access in the Client Access pane, the Add clients (IP or FQDN Hostname) and Clients

panes are hidden and you cannot create or modify these options.

注: The DR Series system always commits writes to NVRAM first before committing any changes to disk.

注: The DR Series system administrator that manages the DR Series system has a different set of privileges

than the CIFS administrator user. Only the DR Series system administrator can change the password for the

CIFS administrator user. To change the password that allows access for the CIFS administrator user, use the

DR Series system CLI authenticate --set --user administrator command. For more information, see the

Dell DR

Series System Command Line Reference Guide

at dell.com/support/manuals.

5. Once the container type settings have been modified, click Modify this Container (or click Cancel to display the

Containers page).

The Successfully updated container dialog is displayed. The list of containers in the Containers summary table is

updated with the newly modified container.

删除容器

删除容器之前，Dell 建议首先认真考虑是否需要保留容器中的数据。要删除包含数据的现有容器，请完成以下

操作：

小心: 在删除任何包含经过重复数据消除的数据的 DR Series 容器之前，Dell 建议采取几个步骤以使用另一

种长期保留方法来保留此数据。容器一旦删除，将无法恢复经过重复数据消除的数据。DR Series 系统的

当前版本和更高版本允许在一项操作中删除任何指定容器及其全部内容。

1. 选择 Storage（存储） → Containers（容器）。

此时将显示 Containers（容器）页面，并列出所有当前容器。

2. 单击 Select（选择）以标识要删除的容器，然后单击 Delete（删除）。

此时将显示 Delete Confirmation（删除确认）对话框，提示您已选择删除的特定容器的名称。

3. 在 Delete Confirmation（删除确认）对话框中单击 OK（确定）（或单击 Cancel（取消）以显示 Containers

（容器）页面）。

此时将显示 Successfully removed container（已成功删除容器）对话框。Containers（容器）摘要表将更新

且不再显示已删除的容器。

Moving Data Into a Container

To move data into an existing DR Series system container, complete the following:

1. Click Start → Windows Explorer → Network .