Administrator Guide

6. Enter a Disk pool name, and click Next.
The Summary page for the Disk Pool Configuration Wizard is displayed.
7. Verify the disk pool configuration in the Summary page, and click Next to configure the disk pool you created.
The Performing required task page is displayed, with the status being: Configuration completed successfully. You
have several options available at this point:
– Clear the Create a storage unit for the disk pool.
– Click Finish and close the Disk Pool Configuration Wizard.
– Click Next to create the storage unit with this disk pool.
REMARQUE : If you create the storage unit using the Disk Pool Configuration Wizard, you can skip the step
where you create storage units using a disk pool.
8. Click Next to continue with creating a storage unit using this wizard.
9. Enter a Storage unit name, and click Next.
The Successfully Completed Disk Pool Configuration page is displayed.
10. Click Finish.
To display the disk pool you created, click Devices → Disk Pools in the left navigation pane in the NetBackup
Administrator console.
Création d'unités de stockage à l'aide du pool de disques
Utilisez l'interface graphique de NetBackup pour créer des unités de stockage en utilisant les pools de disques du
système DR Series.
Connectez-vous à NetBackup et procédez comme suit :
1. Dans la fenêtre principale de la console d'administration de NetBackup, cliquez sur Storage (Stockage) dans le
volet de navigation de gauche et sélectionnez Storage Units (Unités de stockage).
2. Dans la fenêtre principale de la console d'administrations de NetBackup, cliquez avec le bouton droit de la souris
et sélectionnez
New Storage Unit (Nouvelle unité de stockage) dans la liste déroulante.
3. Dans la page New Storage Unit, entrez un nom dans Storage unit name (Nom de l'unité de stockage) et
sélectionnez dans la liste
Disk pool (Pool de disques) le pool de disques OST que vous avez créé.
4. Cliquez sur OK pour créer la nouvelle unité de stockage.
Backing Up Data From a DR Series System (NetBackup)
This topic describes how to use NetBackup to back up data from a DR Series system.
Before backing up data, you first need to configure a policy that creates a backup on the OpenStorage Technology (OST)
logical storage unit (LSU). This type of policy is similar to what is done for network-attached storage (NAS) shares,
except that when defining policy attributes, you need to select the LSU that contains the OST disk pool.
To back up data from a DR Series system using a policy, complete the following:
1. Log into the NetBackup Administrator console.
2. Click NetBackup Management in the left navigation pane, and select Policies.
3. In the All Policies main window, right-click OST, and select Change Policy from the drop-down list.
The Change Policy page is displayed.
4. In the Change Policy page, click the Attributes tab, and select the settings for the policy you want to create.
5. Click OK to create the policy, which displays under OST in the main window.
145