Administrator Guide

Item Indicator, Button, or Connector Icon Description

– Two 10/100/1000 Mbps NIC connectors

– Two 100 Mbps/1 Gbps/10 Gbps SFP+/10-

GbE T connectors

5 PCIe expansion card slots (3) Connect up to three full-height PCI Express

expansion cards

6 Hard drives (2) Provides two hot-swappable 2.5-inch hard drives

REMARQUE : The DR4100 system supports up to six 1–GbE ports or up to two 10–GbE ports. For the 1–GbE

ports, these are four internal LAN on Motherboard (LOM) ports referenced in item 4 above that reside on the

network daughter card (NDC), and two additional ports on a PCI Express expansion card referenced in item 5

above. If the DR4100 system is using the two 10–GbE ports, these ports reside on the NDC.

iDRAC Connection

The iDRAC connection requires a network connection between the integrated Dell Remote Access Control (iDRAC)

management port on the DR Series system and another computer running the iDRAC remote console session in a

supported browser. The iDRAC provides remote console redirection, power control, and the out-of-band (OOB) system

management functions for the DR Series system. iDRAC connections are configured using console redirection and the

iDRAC6/7 web interface. The login values you can use for making iDRAC connections are:

• Default username: root

• Default password: calvin

• Default static IP address: 192.168.0.120

For information on how to configure the iDRAC, see the Dell RACADM Reference Guides at support.dell.com/manuals

and Accessing iDRAC6/iDRAC7 Using RACADM.

When the Dell DR Series System splash screen is displayed, you are ready to begin initialization using the DR Series

system CLI login process. For more information, see Logging in and Initializing the DR Series System.

Logging in and Initializing the DR Series System

Use the DR Series system CLI and the Initial System Configuration Wizard to log in to and initialize the system. After

completing a local console or iDRAC connection, log in to the DR Series system CLI:

1. Launch a terminal emulator application (like PuTTY), and type the default IP address for the DR Series system (if

you are not using iDRAC or local console).

2. At the login as: prompt, type administrator, and press <Enter>.

3. At the administrator@<system_name> password: prompt, type the default administrator password (St0r@ge!), and

press <Enter>.

The Initial System Configuration Wizard window is displayed.