Administrator Guide

Eth3:

• MAC: 00:30:59:9A:00:99

• Speed: 1000Mb/s

• Max Speed: 1000baseT/Full

• Duplex: Full

Gestion du mot de passe du système DR Series

Vous pouvez gérer de deux manières le mot de passe de connexion que vous utilisez pour vous connecter au système

DR Series :

• En le modifiant à l'aide de l'option Edit Password (Modifier le mot de passe) dans la page de configuration du

système. Pour plus d'informations, voir Modification du mot de passe du système.

• En réinitialisant le mot de passe par défaut à l'aide de l'option Reset Password (Réinitialiser le mot de passe)

dans la page de connexion au système DR. Pour plus d'informations, voir Restauration du mot de passe par

défaut du système.

Modifying the System Password

To configure a new password or to modify an existing password for logging in to the DR Series system, complete the

following:

1. To change the system password, do one of the following:.

– In the navigation panel, select System Configuration, the System Configuration page is displayed. Click

Password Management.

– In the navigation panel, select System Configuration → Password, the Password Management page is

displayed.

2. Click Edit Password.

The Edit Password dialog is displayed.

3. In Current password, type the current password for the system.

4. In New password, type the new system password.

5. In Confirm password, retype the new password to confirm this as the new password replacing the existing system

password.

6. Click Change Password (or click Cancel to display the System Configuration page).

If successful, a Password change was successful dialog is displayed.

Resetting the Default System Password

To reset the system to use the default password (St0r@ge! ) for logging in, complete the following:

1. In the Login window, click Reset Password.

The Reset Password dialog is displayed.

If the password reset option is set to Service Tag, proceed to step 2.

If the password reset option is set to Service Tag and Administrator Email, proceed to step 4.

2. In Service Tag, type the Service Tag associated with your system, and click Reset Password.

REMARQUE : If you are unsure of the Service Tag associated with your DR Series system, it can be found on

the Support page (click Support in the navigation panel to display the Support Information pane, which

displays the Service Tag).