Administrator Guide
メモ: Editing your existing login password is different than resetting your login password. Click Edit Password in
the System Configuration page to edit your login password to reflect any value that meets the system password
requirements (for more information, see Modifying the System Password. Click Reset Password in the Login page
to reset your login password to the system default value, which requires you to provide the service tag for your
system. For more information, see Resetting the Default System Password.
Shutdown
Shutdown—click this option to display the Shutdown System dialog, where you can shut down the DR Series system.
注意: Shutdown powers Off the appliance on which the system software is installed. Once in a powered Off state,
you can power it On at its physical location or using an iDRAC configuration to the system.
Reboot
Reboot—click this option to display the Reboot System dialog, where you can reboot the DR Series system.
Support(サポート)ページとオプション
Dashboard(ダッシュボード)→ Support(サポート)をクリックすると、Support(サポート)ページが表示
されます。Support(サポート)ページの Support Information(サポート情報)ペインに、システムの現在のサ
ポート関連情報が表示されます。
メモ: 表示されるイーサネット一覧(MAC および速度)の正確な数字は、システムに搭載されたイーサ
ネットポートの数とタイプによって異なります。たとえば、DR4000 システムは最大 4 つの 1–GbE ポート
または 2 つの 10–GbE ポートをサポートでき、DR4100 システムは最大 6 つの 1–GbE ポート(ネットワーク
ドーターカードの 4 つの内蔵 1–GbE ポートと PCI Express 拡張カードの 2 つの 1–GbE ポート)または 2 つ
の 10–GbE ポートをサポートできます。次に、4 ポート(eth0~eth3)の例を示します。
• Product Name
• ソフトウェアバージョン
• サービスタグ
• Last Diagnostic Run(最終診断実行)
• BIOS バージョン
• MAC アドレス
• iDRAC IP Address(iDRAC の IP アドレス)
• eth0 MAC
• eth0 Speed(eth0 速度)
• eth1 MAC
• eth1 Speed(eth1 速度)
• eth2 MAC
• eth2 Speed(eth2 速度)
• eth3 MAC
• eth3 Speed(eth3 速度)
また、このページから、DR Series システムの追加ストレージのサポート、アップグレード、およびライセン
スに関するオプションとして、Diagnostics(診断)、Software Upgrade(ソフトウェアアップグレード)、お
よび License(ライセンス)を利用できます。詳細については、「Support(サポート)ページオプションの理
解」を参照してください。
68