Administrator Guide
– Capacity Used (system capacity used in Gibibytes or GiBs)
– Capacity Free (system capacity free in GiBs)
– Read Throughput (read throughput rate in Mebibytes or MiB/s)
– Write Throughput (write throughput rate in MiB/s)
– Current Files (current number of files in system)
– Current Bytes (current number of ingested bytes in system)
– Post Dedupe Bytes (number of bytes after deduplication)
– Post Compression Bytes (number of bytes after compression)
– Compression Status (current compression status)
– Cleaner Status (current space reclamation process status)
– Total Inodes (total number of data structures)
– Dedupe Savings (deduplication storage savings by percentage)
– Compression Savings (compression storage savings by percentage)
– Total Savings (total storage savings by percentage)
CLI を使用した DR Series システム統計の表示
現在の DR Series システム統計をチェックするための代替方法としては、DR Series システムの CLI stats --
system コマンドを使用してシステム統計の次のカテゴリを表示します。
• 使用容量(使用済みシステム容量、ギビバイト(GiB))
• 空き容量(空いているシステム容量、GiB)
• 読み取りスループット(読み取りスループットレート、メビバイト(MiB)/s)
• 書き込みスループット(書き込みスループットレート、MiB/s)
• 現在のファイル(システム内の現在のファイル数)
• 現在のバイト(システム内の現在の取り込みバイト数)
• 重複排除後バイト数(重複排除後のバイト数)
• 圧縮後バイト数(圧縮後のバイト数)
• 圧縮状態(現在の圧縮状態)
• クリーニング状態(現在の領域再利用処理状態)
• 合計アイノード(データ構造の総数)
• 重複排除節約率(重複排除のストレージ節約率(%))
• 圧縮節約率(圧縮のストレージ節約率(%))
• 合計節約率(合計ストレージ節約率(%))
DR Series システムの CLI コマンドの詳細については、『
Dell DR Series System Command Line Reference Guide
』
(Dell DR Series システムコマンドラインリファレンスガイド)を参照してください。
CLI を使用したコンテナ固有の統計の表示
DR Series システム CLI の stats --container --name <container name> コマンドを使用して、コンテナ固有の統計を
次のカテゴリで表示できます。
• コンテナ名(コンテナの名前)
• コンテナ ID(コンテナに関連付けられた ID)
• 合計アイノード(コンテナ内のデータ構造の総数)
• 読み取りスループット(コンテナの読み取りスループット速度、メビバイト / 秒(MiB/s))
• 書き込みスループット(コンテナの書き込みスループット速度、MiB/s)
97