Administrator Guide

To display the disk pool you created, click Devices → Disk Pools in the left navigation pane in the NetBackup
Administrator console.
디스크 풀을 사용하여 스토리지 장치 생성
NetBackup GUI를 사용하여 DR Series 시스템의 디스크 풀을 통해 스토리지 장치를 생성합니다.
NetBackup에 로그인하고 다음을 수행합니다.
1. NetBackup Administrator(NetBackup 관리자) 콘솔 기본 창의 왼쪽 탐색 창에서 Storage(스토리지)를 클릭하고
Storage Units(스토리지 장치)를 선택합니다.
2. NetBackup Administrator(NetBackup 관리자) 콘솔 기본 창의 드롭다운 목록에서 New Storage Unit(새 스토리
지
장치)를 선택합니다.
3. New Storage Unit(새 스토리지 장치) 페이지의 Storage unit name(스토리지 장치 이름)에 이름을 입력하고
Disk pool(디스크 풀) 드롭다운 목록에서 생성한 OST 디스크 풀을 선택합니다.
4. OK(확인)를 클릭하여 새 스토리지 장치를 생성합니다.
Backing Up Data From a DR Series System (NetBackup)
This topic describes how to use NetBackup to back up data from a DR Series system.
Before backing up data, you first need to configure a policy that creates a backup on the OpenStorage Technology (OST)
logical storage unit (LSU). This type of policy is similar to what is done for network-attached storage (NAS) shares,
except that when defining policy attributes, you need to select the LSU that contains the OST disk pool.
To back up data from a DR Series system using a policy, complete the following:
1. Log into the NetBackup Administrator console.
2. Click NetBackup Management in the left navigation pane, and select Policies.
3. In the All Policies main window, right-click OST, and select Change Policy from the drop-down list.
The Change Policy page is displayed.
4. In the Change Policy page, click the Attributes tab, and select the settings for the policy you want to create.
5. Click OK to create the policy, which displays under OST in the main window.
6. Right-click the policy, and select Manual Backup from the drop-down list.
The Manual Backup page is displayed.
7. In the Manual Backup page, enter the name of the media server in Server, and click OK.
To monitor the status of any backup operation, click Activity Monitor in the left navigation pane of the NetBackup
Administrator console, and select the backup job you are interested in to view details about the operation.
Restoring Data From a DR Series System Using NetBackup
This topic describes how to use NetBackup to restore data from a DR Series system. The process for restoring data from
OpenStorage Technology (OST) logical storage units (LSUs) is similar to how restores are performed from any backup
device.
To restore data from a DR Series system, complete the following:
1. Log into the NetBackup Administrator console.
2. Click Backup, Archive, and Restore in the left navigation pane.
3. In the Restore main window, click the Restore Files tab.
4. Select the data that you want to restore, and click OK.
135