Administrator Guide

rear chassis on the first enclosure. This is considered a redundant mode connection via the SAS In/Out connectors on

the enclosures with the DR Series system appliance.

If you install a second enclosure and cable it as described here, make sure to set the enclosure mode switch on the

MD1200 front chassis to the top (unified mode) positions. For more information, see

Dell PowerVault MD1200 and

MD1220 Storage Enclosures Hardware Owner's Manual

at support.dell.com/manuals.

그림 3 . Dell PowerVault MD1200 Rear Chassis

그림 4 . Unified Mode Daisy-Chained Redundant Path Dell PowerVault MD1200 Enclosures