Administrator Guide

NOTA: After you have reset the login password to its default and logged in to the DR Series system, Dell
recommends for security reasons that you create a new unique login password.
4. In Service Tag, type the Service Tag associated with your system.
NOTA: If you are unsure of the Service Tag associated with your DR Series system, it can be found on the
Support page (click Support in the navigation panel to display the Support Information pane, which displays
the Service Tag).
5. In Administrator Email enter the email address of the administrator of this system.
The Administrator Email that you enter must match the administrator email address configured in the DR Series
system. If you have set security questions, the security questions are displayed.
6. Enter the answers to the configured security questions in Answer 1 and Answer 2.
7. Click Send Now.
An email with a unique code, used to reset the password, is sent only to the configured administrator email
address. The code is valid for only 15 minutes. The password rest code expires after 15 minutes and cannot be
used. You must repeat the password reset procedure to regenerate the code again.
Apagado del sistema DR Series
Si es necesario, puede apagar el sistema DR Series seleccionando Shutdown (Apagado) en la página System
Configuration (Configuración del sistema). Sin embargo, debería conocer las implicaciones de esta acción para las
operaciones del sistema antes de intentar apagar el sistema.
PRECAUCIÓN: La opción Shutdown (Apagado) apaga el servidor en el que el software del sistema DR Series está
instalado. Una vez apagado, solo puede volver a encenderlo en su ubicación física o debe utilizar la conexión
iDRAC con el sistema DR Series.
Realice los pasos siguientes para apagar su sistema DR Series:
1. En el panel de navegación, seleccione System Configuration (Configuración del sistema).
Se muestra la página System Configuration (Configuración del sistema).
2. Haga clic en Shutdown (Apagado) en la barra de opciones de la página System Configuration (Configuración del
sistema)
.
Se muestra el cuadro de diálogo Shutdown confirmation (Confirmación de apagado).
3. Haga clic en Shutdown System (Apagar sistema) para apagar el sistema (o haga clic en Cancel [Cancelar] para
regresar a la página System Configuration [Configuración del sistema]).
Reinicio del sistema DR Series
Si es necesario, puede reiniciar el sistema DR Series seleccionando la opción Reboot (Reiniciar) en la página System
Configuration (Configuración del sistema). Para reiniciar su sistema:
1. En el panel de navegación, seleccione System Configuration (Configuración del sistema).
Se muestra la página System Configuration (Configuración del sistema).
2. Haga clic en Reboot (Reiniciar) en la barra de opciones de la página System Configuration (Configuración del
sistema).
Se muestra el cuadro de diálogo de confirmación Reboot System (Reiniciar sistema).
3. Haga clic en Reboot System (Reiniciar sistema) para reiniciar el sistema (o haga clic en Cancel [Cancelar] para
regresar a la página System Configuration [Configuración del sistema]).
80