Owners Manual

Drive-Status

Indicator Pattern

(RAID Only)

Condition

NOTE: The drive status indicator remains off until all hard drives are initialized

after the system is turned on. Drives are not ready for insertion or removal

during this time.

Blinks green,

amber, and off

Predicted drive failure

Blinks amber four

times per second

Drive failed

Blinks green slowly Drive rebuilding

Steady green Drive online

Blinks green three

seconds, amber

three seconds, and

off six seconds

Rebuild aborted

Back-Panel Features And Indicators

The following topic describes the back-panel features and indicators of the Dell DR6000 system.

Figure 3. Back-Panel Features And Indicators

Item Indicator, Button, or

Connector

Icon Description

1 System identification

button

The identification buttons on the front and back

panels can be used to locate a particular system

within a rack.

• When one of these buttons is pressed, the

system status indicator on the back flashes until

one of the buttons is pressed again.

• Press to toggle the system ID on and off.

• If the system stops responding during POST,

press and hold the system ID button for more

than five seconds to enter BIOS progress mode.