Owners Manual

Error Code Message Information
3. If the issue persists, see Getting Help.
PSU0035
Message An over voltage fault detected on power supply <number>.
Action Check input power or reinstall the power supply. If the issue
persists, see Getting Help.
PSU0036
Message An over current fault detected on power supply <number>.
Details This failure may be the result of an electrical issue with
cables or subsystem components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system
for damage.
3. If the issue persists, see Getting Help.
PSU0037
Message Fan failure detected on power supply <number>.
Action Check for fan blockage. If the problem persists, see Getting
Help.
PSU0076
Message A power supply wattage mismatch is detected; power supply
<number> is rated for <value> watts.
Details Power supplies should be of the same input type and power
rating.
Action Install matched power supplies and review this manual for
proper configuration.
PSU1201
Message Power supply redundancy is lost.
Details The power supply tries to operate in a degraded state.
System Performance and power redundancy may be
degraded or lost.
Action Check input power. Reinstall the power supply. If the issue
persists, see Getting Help.
PSU1204
Message The power supplies are not redundant. Insufficient resources
to maintain normal operations.
Details The current power operational mode is non-redundant
because of a power supply exception, a power supply
inventory change, or a system power inventory change.
117