Owners Manual

Entering System Setup

1. Turn on or restart your system.

2. Press <F2> immediately after you see the following message:

<F2> = System Setup

If your operating system begins to load before you press <F2>, allow the system to finish booting,

and then restart your system and try again.

Responding To Error Messages

If an error message is displayed while the system is booting, make a note of the message. For more

information, see System Error Messages.

NOTE: After installing a memory upgrade, it is normal for your system to display a message the first

time you start your system.

Using The System Setup Navigation Keys

Keys Action

Up arrow Moves to the previous field.

Down arrow Moves to the next field.

<Enter> Allows you to type in a value in the selected field (if applicable) or follow the link in

the field.

Spacebar Expands or collapses a drop-down list, if applicable.

<Tab> Moves to the next focus area.

NOTE: For the standard graphics browser only.

<Esc> Moves to the previous page until you view the main screen. Pressing <Esc>in the

main screen displays a message that prompts you to save any unsaved changes

and restarts the system.

<F1> Displays the System Setup help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until

you restart the system.

System Setup Options

System Setup Main Screen

NOTE: Unified Extensible Firmware Interface (UEFI) Boot Manager is not supported. BIOS Boot

Manager is the default boot mode.