Owners Manual

Menu Item Description
System
Manufacturer
Contact
Information
Displays the contact information of the system manufacturer.
Memory Settings Screen
Menu Item Description
System Memory
Size
Displays the amount of memory installed in the system.
System Memory
Type
Displays the type of memory installed in the system.
System Memory
Speed
Displays the system memory speed.
System Memory
Voltage
Displays the system memory voltage.
Video Memory Displays the amount of video memory.
System Memory
Testing
Specifies whether system memory tests are run during system boot. Options are
Enabled and Disabled. By default, the System Memory Testing option is set to
Disabled.
Memory Operating
Mode
Specifies the memory operating mode. The options available depending on the
memory configuration of your system are Optimizer Mode, Advanced ECC Mode,
Mirror Mode, Spare Mode, and Spare with Advanced ECC Mode. By default, the
Memory Operating Mode option is set to Optimizer Mode.
NOTE: The Memory Operating Mode can have different defaults and available
options based on the memory configuration.
Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory
configuration is installed. If Disabled, the system supports asymmetric Non-
Uniform Memory Architecture (NUMA) memory configurations. By default, Node
Interleaving option is set to Disabled.
Serial Debug
Output
By default, it is set to disabled.
Processor Settings Screen
Menu Item Description
Logical Processor Allows you to enable or disable logical processors and display the number of
logical processors. If the Logical Processor option is set to Enabled, the BIOS
displays all the logical processors. If this option is set to Disabled, the BIOS only
displays one logical processor per core. By default, the Logical Processor option is
set to Enabled.
18