Reference Guide

• DR4100 system—which consists of preinstalled DR Series system software on a modified Dell R720xd appliance

platform.

• DR6000 system—which consists of preinstalled DR Series system software on a modified Dell R720xd appliance

platform.

• DR2000v system— which is a Virtual Appliance template that can run on a VMware ESXi or Microsoft Hyper-v

server. Many CLI commands are not applicable to the DR2000v and are noted in this guide.

• DR4300e system—which consists of preinstalled DR Series system software on a modified Dell R730xd appliance

platform.

• DR4300 system—which consists of preinstalled DR Series system software on a modified Dell R730xd appliance

platform and offers a higher base capacity than the DR4300e.

• DR6300 system—which consists of preinstalled DR Series system software on a modified Dell R730xd appliance

platform and offers a higher base capacity than the DR4300.

The internal system drive capacity and available physical capacities of the DR Series system vary, depending on your

system type and drives installed. For the latest detailed information, see the

Dell DR Series System Release Notes

and

the

Dell DR Series System Interoperability Guide

Accessing the DR Series System CLI Commands

To access the DR Series system CLI commands from the system CLI prompt, complete the following:

1. Launch a terminal emulation application and start the process for logging in to the DR Series system.

2. In Host Name (or IP address), type the host name or IP address for the DR Series system, and click Open.

3. At the system prompt, enter the username for the Administrator:

• Type administrator

• Press <Enter>

4. At the administrator password prompt, enter the password for the Administrator (the default is St0r@ge!):

• Type St0r@ge!

• Press <Enter>

The DR Series system administrator prompt is displayed.

5. At the administrator prompt, type help.

The DR Series system CLI commands are displayed. For more information, see the section DR Series System CLI

Commands Overview.

DR Series System CLI Commands Overview

The following command groups are available. For more information on each command group, run <command name>

--help show

Table 1. DR Series System CLI Commands Overview

Command Group Description

alerts

View system events and configure email notifications,

contact information, and daily reports.

authenticate

Configure Active Directory (AD) authentication.

connection

a container.