Reference Guide

Result

Successfully started tcpdump, please use "network --tcpdump --stop" to stop.

For more information, see network --tcpdump [--port <nfs | windows | replication | ost>] [--pkt_size <128 - 32768>] [--

file_size <0 - 100>] [--stop] [--host <ip address list>].

network --tcpdump [--file_size <0 - 100>]

Description

Collects TCP/IP packet information based on a specific file size that you can configure (such as 3 Megabytes or MB).

NOTE: To stop the tcpdump process, use the DR Series system CLI network --tcpdump --stop command.

Syntax

network --tcpdump --file_size 3

Result

Successfully started tcpdump, please use "network --tcpdump --stop" to stop.

For more information, see network --tcpdump [--port <nfs | windows | replication | ost>] [--pkt_size <128 - 32768>] [--

file_size <0 - 100>] [--stop] [--host <ip address list>]

network --tcpdump [--host <ip address list>]

Description

Collects TCP/IP packet information based on a specific host IP address (for example, 10.10.11.12).

NOTE: To stop the tcpdump process, use the DR Series system CLI network --tcpdump --stop command.

Syntax

network --tcpdump --host 10.10.11.12

Result

Successfully started tcpdump, please use "network --tcpdump --stop" to stop.

NOTE: You can also specify a number of host IP addresses using this command in a comma-delimited format (--

host 10.10.11.12,10.12.12.13,10.10.12.14).

network --tcpdump [--port <nfs | windows | replication | ost | rds>]

Description

Filters TCP/IP packet information based on a specific port type. In this example, by specifying an OpenStorage

Technology (OST) port type using the DR Series system CLI network --tcpdump --port ost command.

Syntax

network --tcpdump --port ost

Result

Successfully started tcpdump, please use "network --tcpdump --stop" to stop.

For more information, see network --tcpdump [--port <nfs | windows | replication | ost | rds>] [--pkt_size <128 - 32768>]

[--file_size <0 - 100>] [--stop] [--host <ip address list>].