Reference Guide

NOTE: The above options are only available on a Physical DR.
Syntax
system --storage --unblink --type external --service_tag CTKHVW3
Result
Turned off blinking for all disks in enclosure "CTKHVW3".
system --storage [--extend]
Description
This command is used to extend your storage space on a DR4300e system. If you purchased your DR4300e system with
one 4.5TB license, and later require additional capacity, you can extend the usable capacity in your base DR Series
system. You run this command after you have purchased and added a 4.5TB capacity license. For example, you would
run the system --license --add command to add a new expansion license. (You can then run the system --
license --show --verbose command to view and confirm that the new storage expansion license is added/
enabled.)
Syntax
system --storage --extend
Result
# system --storage --extend
WARNING: IO to the box will be stopped during this operation.
Do you want to continue (yes/no) [n]? yes
Please enter the root password:
Stopping filesystem... Done.
Expanding data storage volume... Done.
Starting filesystem... Done.
Data storage expanded successfully.
system --mgmt_traffic
Description
The command configures Webserver or Telnet to use a specific network interface.
Syntax
system --mgmt_traffic [--add] [--type <Webserver|Telnet>] [--interface <bondN|
ethN|lo>]
[--update] [--type <Webserver|Telnet>] [--interface <bondN|
ethN|lo>]
[--delete] [--type <Webserver|Telnet>]
--add Add access network configuration.
--update Update access network configuration.
--delete Delete access network configuration.
94