Release Notes

ID Issue Description Workaround/Solution
23797 NDMP user name must be changed to ndmp_user
in GUI.
Addressed in release 3.2.0.1.
24312 Certain hypervisor host NICs will perform poorly
and may require a driver update to fully support
VMQ feature.
Note that this works as
designed. To resolve this
issue you should check on
your Hypervisor host NIC
feature list and update the
driver to the latest version.
For example, Broadcom
NetXtreme I and NetXtreme
II Ethernet adapter needs to
get driver update to 17.6.0 or
above to add VMQ support,
otherwise you may
experience performance
degradation during normal
operations.
Driver for NetXtreme I and
NetXtreme II Ethernet
adapter: http://
www.dell.com/support/
home/us/en/19/Drivers/
DriversDetails?
driverId=CYKKJ&osCode=M
WS80&fileId=3197327398&la
nguageCode=EN&categoryId
=NI
Firmware for NetXtreme I
and NetXtreme II Ethernet
adapter: http://
www.dell.com/support/
home/us/en/19/Drivers/
DriversDetails?
driverId=P32M4&osCode=M
WS80&fileId=3197328666&la
nguageCode=EN&categoryId
=NI
20539 After installing Rapid CIFS Filter Driver, an
incorrect driver version is displayed.
If at the end of successful
installation, the version of the
driver loaded (which can be
checked using rdcifsctl.exe
driver -q) is lower than the
version of the installed
package (listed under Control
Panel > Installed products),
then you should restart the
machine. This issue can
occur if the system fails to
rename/delete driver files
under the system folder.
12