Release Notes

ID Issue Description Workaround/Solution
19655 smbd fix for unique corner case that causes a
core
Corrected in version 3.1.
19614 Need to remove error reporting on the following
errors: OST images not found and vRanger errors
Corrected in version 3.1.
19576 If you set up two bond interfaces with two
different subnets but use the same static IP
address, the configuration service fails.
Corrected in version 3.1.
19233 Need to clear the error, "file system is corrupt and
please run consistency checker," after a system --
init
Corrected in version 3.1.
19184 During container delete, cleaner does not start. Corrected in version 3.1.
19091 Cannot collect diagnostics if an upgrade fails. Corrected in version 3.1.
Using the "diagnostics --start
--service" command can
start the diagnostic service if
it is down after upgrade
failure. Once the service is
up, diagnostics can be
collected.
18833 The Reboot link is enabled after a DR Series
system software upgrade.
Corrected in version 3.1. The
Reboot link is enabled during
upgrade and has now been
disabled during upgrade. It
can be selected once the
upgrade is complete.
18742,
18629
With CIFS, backups are failing, with error "The
specified network name is no longer available..."
after upgrade.
Corrected in version 3.1.
18664 On the DR Series system log on page, if you enter
an invalid user name, the Your password
was not correct error displays.
Corrected in version 3.1. The
correct error message is
now displayed.
18661 If you power on a new MD1200 expansion
enclosure (that is cabled in) while the base DR
Series system is operational, the machine may go
into maintenance mode with the following reason
error code: One of the storage
enclosure has become offline,
please power-off the appliance,
fix the connectivity issues and
power-on the appliance.
Corrected in version 3.1.
18154 Include racadm in DR image so that the DRAC
settings can be managed from inside of the OS
instead of lifecycle controller.
Corrected in version 3.1.
22