Release Notes

ID Issue Description Workaround/Solution
14949 CLI expansion license was showing up as “In Use:
No” even though the expansion license was
installed.
Corrected the CLI
command system --
show --license –
verbose to display the
license in the correct
state.
[root@swsys-221
~]# system --show
--license --verbose
Feature ID: 3
Description: 27TB
Status: Enabled
Entitlement ID:
Start Date:
End Date:
Is Eval: No
In Use: Yes
14897 OST limiter throughput below the set value. The throttling speed limits
that can be set using the
DR Series system CLI
commands
(replication --
limit --speed)
would not match the set
replication bandwidth
limits.
Corrected some minor issues
with the OST limits to correct
this issue.
14889 Add the option to the CLI to show if the SNMP
Trap’s email is on or off.
Added additional option
to alerts --show –
email command.
Email SNMP
Trap's : Yes or
No
Added additional option to
alerts --show –
email command to show
status of Trap’s e-mail.
14845 system --upgrade command fails with an
error message:Upgrade image not
found
.
After replacing a
hardware CRU or FRU, the
DR may come up in
support mode with a
request to upgrade the
hardware.
The GUI and CLI now place
the uploaded SW package
into the same directory so
upon HW replacement this
same image can be utilized
to upgrade the new
component when necessary
with no special user action
required.
14724 Replication speed limits not throttling as
expected.
The throttling speed limits
that can be set using the
DR Series system CLI
commands
(replication --
limit --speed)
would not match the set
replication bandwidth
limits.
Corrected some minor issues
with the replication limits to
address this issue.
13537 Dell DR4100 system enclosure hot add fails in
Release 2.0.
Attempting to perform a
"hot add" of an external
expansion shelf
The workaround is to
observe the following best
practice for connecting an
34