Release Notes

ID Issue Description Workaround/Solution
expansion shelf
enclosure to complete.
14126 Do not connect an external expansion shelf
enclosure to a DR Series system prior to
upgrading to the 2.0 release.
System issues occur if
any DR4000 systems
running the pre-2.0
release system software
connect and power on
any external expansion
shelf enclosure, and then
upgrade to the DR Series
system 2.0 release
software. To prevent this
condition, observe the
following best practice:
• An expansion shelf
enclosure should only
be powered on and
connected to a
DR4000 system after
the system has been
upgraded to the 2.0
release software.
• Follow the
recommended
sequence of
operations listed in
the Workaround/
Solution section.
To resolve this issue,
observe the following best
practice for upgrading earlier
DR4000 systems to the 2.0
release software (this must
be done prior to connecting
and powering on an external
expansion shelf enclosure):
1. Upgrade the DR4000
system with the release
2.0 system software.
2. Power off the DR4000
system (required for 2.0
with Dell OpenManage
7.1).
3. Connect the external
expansion shelf (or
shelves) with cabling to
the DR4000 system.
4. Power on the external
expansion shelf (or
shelves).
5. Power on the DR4000
system.
14427 The Google Chrome browser reports that the
upgrade page is unresponsive during a file
upload.
The Google Chrome
browser displays a
Page(s) Unresponsive
dialog, which indicates it
is in a "waiting" mode
when uploading the
DR4000 system software
payload needed for the
upgrade. The Page(s)
Unresponsive dialog
allows only two options:
1. Click the DR4000
system software
upgrade in the
dialog list box, and
click Kill pages.
2. Click Wait.
There is no workaround at
this time. Dell recommends
that you click Wait and allow
sufficient time for the
uploading of the DR4000
system software upgrade to
complete.
14895 Restore Manager needs to add a message to
remove the USB key after the operating system
installation completes.
The USB key used during
the Dell DR Restore
Manager operating
system installation
To prevent the overwriting of
the USB key, when the
operating system installation
is successful, it is
36