Release Notes

ID Issue Description Workaround/Solution
process can be
overwritten if it is not
removed after
successfully installing the
operating system.
recommended that you
observe the following best
practices:
1. Remove the USB key.
2. Reboot the system.
14920 Kernel panic due to soft lockup after killing power
to the enclosure.
A softlock error condition
can occur if an active
data ingest is in progress
and any active external
expansion shelf
enclosure loses both of
its power supplies.
Because an error
associated with inflight
write data is detected, the
DR Series system
performs a "kernel panic"
and reboots.
During the reboot, if the
external expansion shelf
enclosure was already
powered on and there
was active inflight data in
the PERC controller
cache, the DR Series
system remains in the
BIOS window.
The workaround to resolve
this issue is to perform the
following:
1. Follow the instructions
displayed on the BIOS
console or contact Dell
Support for assistance.
2. Import the Foreign
Configuration.
3. Accept the
Configuration.
4. Do not run the
configuration utility (as
this will clear the
configuration).
5. Ensure that you follow
these instructions
explicitly or you will
lose your data.
37