Release Notes

ID Issue Workaround
Do you want to continue with the installation of
<DellRDSPlugin-64bit> [y,n,?]y
24597 CIFS usage graph shows that there are CIFS
writes, when running iSCSI I/O only.
The stats reported on the iSCSI graph are accurate. Due to
a bug false stats getting reported on the CIFS chart which
can be ignored. This issue will be fixed in the upcoming 3.2
hot-fix.
23709 Changing machine host name doesn't get
updated in all components
This issue does not cause known failures to the normal
operation of the DR and can be ignored. It will be fixed in a
future release.
23641 Cannot join into domain by adding DR into
multiple OUs
In the authenticate command type as follows:--ou
topLevelOU/middleLevelOU/LowerLevelOU/
TargetOU
20553 Specific umount options do not work for Rapid
NFS.
The -l and -f options are not supported in the rdnfs unmount
procedure.
20426 Replication traffic that is configured to go
through an assigned bond may still run
through the default bond (bond0).
If you want to run replication traffic through another bond
interface, contact Technical Support to update the route.
18837 Manual modifications made to the Rapid NFS
rdnfs.cfg file are not preserved between plug-
in updates.
Manually modify the rdnfs.cfg again after upgrading the
plug-in.
17294 An NVBU backup will stop if the DR Series
system goes into maintenance mode as it
moves into a read-only condition when this
occurs.
Restart the datacopy operation after the DR Series system
enters the operational mode.
17206 Advanced networking allows you to change
the IP of an interface that is part of a
replication link.
Understand your current configuration before adding new
advanced networking configuration so that you do not
impact the current system configuration.
16280 When you try to get replication statistics, the
system displays the Software error:
Use of uninitialized value in
division (/) at helper.pl line
3548 error.
This is due to the replication target not being in an
operational state. Correct the replication target and refresh
or use the CLI. The information is available by using the
command line. We will correct this error in a future release.
16053 After you install the Rapid CIFS plugin and
replication operations are performed, you
receive a blue screen and the following error:
STOP 0x00000027 (parameter1,
parameter2, parameter3,
parameter4) RDR_FILE_SYSTEM
This is a Microsoft bug that occurs on shared network
resources on a computer that is running Windows Server
2008 R2 or Windows 7. To fix, see Microsoft Knowledge
Base article 2584874.
9